Do you need asphalt sealcoating or patching done in Dade County? With Hulse Construction Group the pavement solutions are durable and reliable!
Pavements made of asphalt are prone to excessive damage, and Dade County is not an easy place in which to maintain them. The weather, humidity and the constant stream of vehicles that go over a regular driveway or commercial pavement can break them down far too early. Over time asphalt cracks, the color can badly fade, and the pavement itself can start to crumble. That is when every bit of helpful and protective maintenance begins to establish its’ effects.
If you need asphalt sealcoating contractors in Dade County, the best choice is Hulse Construction Group. Whether it’s routine asphalt sealcoating in Dade County or extensive asphalt patching services that need precise work to stop further damage, we treat every project with utmost care.
What is Asphalt Seal Coating and Is It Needed?
Sealcoating is the layer of protection placed on top of any asphalt surface. It also serves as the sunscreen for pavements, as it defends the surface from rain, oil spills, oxidation, and UV rays.
Without seal coating, asphalt is likely to crack and fade, and eventually break. Unsealed surfaces get worse much faster, thus requiring much more expensive repair or replacement. It is for that reason, a lot of property owners reach out to asphalt sealcoating contractors in Dade County like us to help preserve their property.
Advantages of Asphalt Sealcoating:
- Increases the longevity of the asphalt
- Retains deep black color for an updated look
- Decreases the expenses needed for repairs
- Increases resistance to water, oil, and chemicals
- Increases curb appeal and overall value of the property
For most commercial properties, the reputation of the business is upheld when there is a neat and orderly parking lot or a driveway that is clean and well maintained.
Asphalt Sealcoating Dade County: Procrastination on Such a Request is a Smart Idea
In South Florida, the combination of intense sun and seasonal rains creates a special need for sealcoating due to the region’s weather conditions, asphalt is much more prone to drying and cracking. Hence, property owners and managers within the vicinity often space sealcoating schedules every two to three years.
Hulse Construction Group knows that sealed coat should be installed when the weather is most fitting and will adjust timing to install when weather is most fitting so that perfect grouting and a lasting seal will be achieved.
No matter if its a residential driveway or an entire shopping region, we pride ourselves in our asphalt sealcoating in Dade County projects and their lasting durability and preservation.
Importance of Timely Asphalt Patching Services
While full resurfacing is an option, patching first may be a better choice. Asphalt patching services in Dade County are performed to fill potholes, repairs cracks, and even addresses soft spots before they become a bigger and much more costly problem. When performed correctly, patching restores the surface and reestablish the base, which increases the overall surface durability.
Some of the most prevalent signs and symptoms that you may need some asphalt patching includes:
- Potholes or craters you can see
- Tested specific areas where water is pooling
- Alligator cracking (A pattern of surface cracks)
- Uneven surfaces, which can pose a trip risk
- Spongy areas where there should be solid footing under one’s feet or tires
These pointers can result to water and soil erosion accumulating under the top surface of your pavement. In order to prevent the erosion, you can hire the most local asphalt sealcoating contractors in Dade County to patch your pavement. This is a full service solution that meets your specific pavement needs.
Our Process: What to Expect from Hulse Construction Group
We approach every project with the same mindset, regardless of the size, detail, long-term vision, and strategy to be able to meticulously tackle every aspect of the project. Here’s how we approach and resolve the issue of sealcoating and patching services.
1. Inspection & Consultation
We analyze the health of the pavement and craft a solution that is bespoke to your needs. This can be sealcoating, patching, or the two combined. We always recommend the solution that is the best fit for the pavement.
2. Preparation
Prior to the application of the product, we begin the process of thorough cleaning of the work surface. In the case for patching, this requires the cutting and removal of the defective pavement.
3. Application
Depending on the condition of the surface, sealcoating can be applied in one or two coats. With patching, the process of compacting the new asphalt that has been leveled is then done to ensure that the surface is at the same grade as the other asphalt.
4. Curing & Cleanup
We take the time to allow for proper curing whilst monitoring for safety and cleanliness. For commercial purposes, we work outside of normal hours for the purposes of reducing traffic and safety concerns.
With our approach, we have been able to become a trusted name for asphalt sealcoating in Dade County. The same approach is taken for our clients, businesses, Home Owners Association, and municipalities, and not just to for home owners.
Talk the Walk
Not every paving company is adept to the challenges brought forth with South Florida’s scorching heat. These challenges are best catered to by contracting an asphalt sealcoating contractor in Dade County who is experienced and refined in the territory to know the impact of condition on the pavement’s performance such as climate, vehicular density and types of soil.
We, at Hulse Construction Group, are a locally based company, which means we take time to foster the sociopolis, and our assurance of taking geat care of the bonds we forge with them to accompany the high quality of pavement in impact with the performance of our business is a reason to take pride as a bond based company.
Affordable Long-Term Pavement Solutions for the Commercial Sector
Taking care of the pavement for a commercial complex or a multi-unit residential complex is a very important aspect in operator pavement for payment. This is crucial in order to carry the image of your business in an enhanced way, rather than slander as a liability, along with the surface needing to be free of and cracks.
We assist with:
- Shopping malls
- Schools and places of worship
- Office buildings
- Fenced residential developments
- Block of units
Our aim combines the asphalt patching and sealcoating to make certain the pavement is sleek and appealing to the eyes with the objective of not disturbing the activities that take place during working hours.
Conclusion
While Pavement may not be the most eye-catching feature of the location, we can agree on the fact that it does hold some value. The value comes from the fact that it accompanied with a sleek surface can be a money saving aspect to the business as it retains the functionality along with the aesthetics.
Whether it’s trouble spots that require asphalt patching services or complete asphalt sealcoating in Dade County, Hulse Construction Group’s workmanship is tailored to withstand the elements of Florida for years.
Instead of waiting for the cracks to worsen, contact our experts to find proactive, efficient, and cost-effective means for pavement preservation and protection.
FAQs
Q1: How often should I schedule asphalt sealcoating in Dade County?
A: Every 2 to 3 years, although it entails age, use and condition of pavement, as well as sun and water exposure.
Q2: Is patching a permanent solution?
A: It’s a cost-effective solution for pavement preservation, but eventually, heavily damaged areas will need resurfacing.
Q3: How long does it take to apply sealcoating?
A: Most residential projects are done in a day, while the size of the commercial projects determine the time, – we just try our best to minimize downtime.
Q4: What weather is ideal for sealcoating?
A: We try to schedule projects during the times when we anticipate low rainfall and humidity.Q5: Can you patch and sealcoat the same day?
A: As a rule, the patching process should be completed before sealcoating. Depending on how big the patch is, we will likely advise waiting between 24 and 48 hours before the seal coating.
